dmesg - 2014 08 16
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.0-34-generic (buildd@panlong) (gcc version 4.8.2 (Ubuntu 4.8.2-19ubuntu1) ) #60-Ubuntu SMP Wed Aug 13 15:49:09 UTC 2014 (Ubuntu 3.13.0-34.60-generic 3.13.11.4)
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009bbff] usable
BIOS-e820: [mem 0x000000000009f800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
BIOS-e820: [mem 0x000000003fff0000-0x000000003fff2fff] ACPI NVS
BIOS-e820: [mem 0x000000003fff3000-0x000000003fffffff] ACPI data
BIOS-e820: [mem 0x00000000f0000000-0x00000000f1ffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.3 present.
DMI: /GA-M51GM-S2G, BIOS F16A 10/22/2008
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x3fff0 max_arch_pfn = 0x1000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-C7FFF write-protect
C8000-EFFFF uncachable
F0000-FFFFF write-through
MTRR variable ranges enabled:
0 base 0000000000 mask FFC0000000 write-back
1 disabled
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
found SMP MP-table at [mem 0x000f4d10-0x000f4d1f] mapped at [c00f4d10]
Scanning 1 areas for low memory corruption
initial memory mapped: [mem 0x00000000-0x01ffffff]
Base memory trampoline at [c0097000] 97000 size 16384
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
init_memory_mapping: [mem 0x37800000-0x379fffff]
[mem 0x37800000-0x379fffff] page 2M
init_memory_mapping: [mem 0x34000000-0x377fffff]
[mem 0x34000000-0x377fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x33ffffff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x33ffffff] page 2M
init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[mem 0x37a00000-0x37bfdfff] page 4k
BRK [0x01b8e000, 0x01b8efff] PGTABLE
RAMDISK: [mem 0x34e7a000-0x36734fff]
ACPI: RSDP 000f66d0 000014 (v00 GBT )
ACPI: RSDT 3fff3000 000034 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: FACP 3fff3040 000074 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: DSDT 3fff30c0 004883 (v01 GBT NVDAACPI 00001000 MSFT 0100000C)
ACPI: FACS 3fff0000 000040
ACPI: SSDT 3fff7a00 0001C4 (v01 PTLTD POWERNOW 00000001 LTP 00000001)
ACPI: MCFG 3fff7c00 00003C (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: APIC 3fff7980 000072 (v01 GBT NVDAACPI 42302E31 NVDA 01010101)
ACPI: Local APIC address 0xfee00000
131MB HIGHMEM available.
891MB LOWMEM available.
mapped low ram: 0 - 37bfe000
low ram: 0 - 37bfe000
BRK [0x01b8f000, 0x01b8ffff] PGTABLE
Zone ranges:
DMA [mem 0x00001000-0x00ffffff]
Normal [mem 0x01000000-0x37bfdfff]
HighMem [mem 0x37bfe000-0x3ffeffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00001000-0x0009afff]
node 0: [mem 0x00100000-0x3ffeffff]
On node 0 totalpages: 262026
free_area_init_node: node 0, pgdat c1997200, node_mem_map f73fe020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3994 pages, LIFO batch:0
Normal zone: 1752 pages used for memmap
Normal zone: 224254 pages, LIFO batch:31
HighMem zone: 264 pages used for memmap
HighMem zone: 33778 pages, LIFO batch:7
Using APIC driver default
Nvidia board detected. Ignoring ACPI timer override.
If you got timer trouble try acpi_use_timer_override
Detected use of extended apic ids on hypertransport bus
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
ACPI: IRQ9 used by override.
ACPI: IRQ14 used by override.
ACPI: IRQ15 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009b000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x40000000-0xefffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 14 pages/cpu @f73db000 s36096 r0 d21248 u57344
pcpu-alloc: s36096 r0 d21248 u57344 alloc=14*4096
pcpu-alloc: [0] 0 [0] 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 260242
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing CPU#0
allocated 2097016 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Initializing HighMem for node 0 (00037bfe:0003fff0)
Memory: 999688K/1048104K available (6528K kernel code, 639K rwdata, 2760K rodata, 872K init, 924K bss, 48416K reserved, 135112K highmem)
virtual kernel memory layout:
fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
.init : 0xc19b4000 - 0xc1a8e000 ( 872 kB)
.data : 0xc1660632 - 0xc19b3e80 (3406 kB)
.text : 0xc1000000 - 0xc1660632 (6529 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU dyntick-idle grace-period acceleration is enabled.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:2304 nr_irqs:512 16
CPU 0 irqstacks, hard=f6c08000 soft=f6c0a000
spurious 8259A interrupt: IRQ7.
Console: colour dummy device 80x25
console [tty0] enabled
tsc: Fast TSC calibration using PIT
tsc: Detected 2009.246 MHz processor
tsc: Marking TSC unstable due to TSCs unsynchronized
Calibrating delay loop (skipped), value calculated using timer frequency.. 4018.49 BogoMIPS (lpj=8036984)
pid_max: default: 32768 minimum: 301
Security Framework initialized
AppArmor: AppArmor initialized
Yama: becoming mindful.
Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys hugetlb
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 5 MCE banks
LVT offset 0 assigned for vector 0xf9
process: using AMD E400 aware idle routine
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
tlb_flushall_shift: 4
Freeing SMP alternatives memory: 32K (c1a8e000 - c1a96000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
ftrace: allocating 27783 entries in 55 pages
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1
smpboot: CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (fam: 0f, model: 4b, stepping: 02)
Performance Events: AMD PMU driver.
... version: 0
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 0
... event mask: 000000000000000f
CPU 1 irqstacks, hard=f6cec000 soft=f6cee000
x86: Booting SMP configuration:
Initializing CPU#1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
.... node #0, CPUs: #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (8037.04 BogoMIPS)
devtmpfs: initialized
EVM: security.selinux
EVM: security.SMACK64
EVM: security.ima
EVM: security.capability
PM: Registering ACPI NVS region [mem 0x3fff0000-0x3fff2fff] (12288 bytes)
pinctrl core: initialized pinctrl subsystem
regulator-dummy: no parameters
RTC time: 23:00:00, date: 08/16/14
NET: Registered protocol family 16
EISA bus registered
cpuidle: using governor ladder
cpuidle: using governor menu
node 0 link 0: io port [3000, fffff]
TOM: 0000000040000000 aka 1024M
node 0 link 0: mmio [f0000000, f1ffffff]
node 0 link 0: mmio [a0000, bffff]
node 0 link 0: mmio [40000000, ffb7ffff]
bus: [bus 00-ff] on node 0 link 0
bus: 00 [io 0x0000-0xffff]
bus: 00 [mem 0x40000000-0xfcffffffff]
bus: 00 [mem 0x000a0000-0x000bffff]
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-1f] at [mem 0xf0000000-0xf1ffffff] (base 0xf0000000)
PCI: MMCONFIG at [mem 0xf0000000-0xf1ffffff] reserved in E820
PCI: Using MMCONFIG for extended config space
PCI: Using configuration type 1 for base access
mtrr: your CPUs had inconsistent variable MTRR settings
mtrr: probably your BIOS does not setup all CPUs.
mtrr: corrected configuration.
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-1f]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x40000000-0xfebfffff]
pci 0000:00:00.0: [10de:02f5] type 00 class 0x050000
pci 0000:00:00.1: [10de:02fa] type 00 class 0x050000
pci 0000:00:00.2: [10de:02fe] type 00 class 0x050000
pci 0000:00:00.3: [10de:02f8] type 00 class 0x050000
pci 0000:00:00.4: [10de:02f9] type 00 class 0x050000
pci 0000:00:00.5: [10de:02ff] type 00 class 0x050000
pci 0000:00:00.6: [10de:027f] type 00 class 0x050000
pci 0000:00:00.7: [10de:027e] type 00 class 0x050000
pci 0000:00:04.0: [10de:02fb] type 01 class 0x060400
pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:04.0: System wakeup disabled by ACPI
pci 0000:00:09.0: [10de:0270] type 00 class 0x050000
pci 0000:00:0a.0: [10de:0260] type 00 class 0x060100
HPET not enabled in BIOS. You might try hpet=force boot option
pci 0000:00:0a.1: [10de:0264] type 00 class 0x0c0500
pci 0000:00:0a.1: reg 0x20: [io 0x1c00-0x1c3f]
pci 0000:00:0a.1: reg 0x24: [io 0x1c80-0x1cbf]
pci 0000:00:0a.1: PME# supported from D3hot D3cold
pci 0000:00:0a.2: [10de:0272] type 00 class 0x050000
pci 0000:00:0b.0: [10de:026d] type 00 class 0x0c0310
pci 0000:00:0b.0: reg 0x10: [mem 0xf5105000-0xf5105fff]
pci 0000:00:0b.0: supports D1 D2
pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.0: System wakeup disabled by ACPI
pci 0000:00:0b.1: [10de:026e] type 00 class 0x0c0320
pci 0000:00:0b.1: reg 0x10: [mem 0xf5106000-0xf51060ff]
pci 0000:00:0b.1: supports D1 D2
pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:0b.1: System wakeup disabled by ACPI
pci 0000:00:0d.0: [10de:0265] type 00 class 0x01018a
pci 0000:00:0d.0: reg 0x20: [io 0xf000-0xf00f]
pci 0000:00:0e.0: [10de:0266] type 00 class 0x010185
pci 0000:00:0e.0: reg 0x10: [io 0x09f0-0x09f7]
pci 0000:00:0e.0: reg 0x14: [io 0x0bf0-0x0bf3]
pci 0000:00:0e.0: reg 0x18: [io 0x0970-0x0977]
pci 0000:00:0e.0: reg 0x1c: [io 0x0b70-0x0b73]
pci 0000:00:0e.0: reg 0x20: [io 0xd400-0xd40f]
pci 0000:00:0e.0: reg 0x24: [mem 0xf5104000-0xf5104fff]
pci 0000:00:0f.0: [10de:0267] type 00 class 0x010185
pci 0000:00:0f.0: reg 0x10: [io 0x09e0-0x09e7]
pci 0000:00:0f.0: reg 0x14: [io 0x0be0-0x0be3]
pci 0000:00:0f.0: reg 0x18: [io 0x0960-0x0967]
pci 0000:00:0f.0: reg 0x1c: [io 0x0b60-0x0b63]
pci 0000:00:0f.0: reg 0x20: [io 0xc000-0xc00f]
pci 0000:00:0f.0: reg 0x24: [mem 0xf5108000-0xf5108fff]
pci 0000:00:10.0: [10de:026f] type 01 class 0x060401
pci 0000:00:10.0: System wakeup disabled by ACPI
pci 0000:00:10.1: [10de:026c] type 00 class 0x040300
pci 0000:00:10.1: reg 0x10: [mem 0xf5100000-0xf5103fff]
pci 0000:00:10.1: PME# supported from D3hot D3cold
pci 0000:00:10.1: System wakeup disabled by ACPI
pci 0000:00:14.0: [10de:0269] type 00 class 0x068000
pci 0000:00:14.0: reg 0x10: [mem 0xf5107000-0xf5107fff]
pci 0000:00:14.0: reg 0x14: [io 0xe000-0xe007]
pci 0000:00:14.0: supports D1 D2
pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:18.0: [1022:1100] type 00 class 0x060000
pci 0000:00:18.1: [1022:1101] type 00 class 0x060000
pci 0000:00:18.2: [1022:1102] type 00 class 0x060000
pci 0000:00:18.3: [1022:1103] type 00 class 0x060000
pci 0000:02:00.0: [10de:0091] type 00 class 0x030000
pci 0000:02:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
pci 0000:02:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:02:00.0: reg 0x1c: [mem 0xf3000000-0xf3ffffff 64bit]
pci 0000:02:00.0: reg 0x24: [io 0xa000-0xa07f]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
pci 0000:02:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xa000-0xafff]
pci 0000:00:04.0: bridge window [mem 0xf2000000-0xf4ffffff]
pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:01:0e.0: [104c:8024] type 00 class 0x0c0010
pci 0000:01:0e.0: reg 0x10: [mem 0xf5004000-0xf50047ff]
pci 0000:01:0e.0: reg 0x14: [mem 0xf5000000-0xf5003fff]
pci 0000:01:0e.0: supports D1 D2
pci 0000:01:0e.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:10.0: PCI bridge to [bus 01] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0xf5000000-0xf50fffff]
pci 0000:00:10.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:10.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
pci 0000:00:10.0: bridge window [mem 0x40000000-0xfebfffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK3] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSMB] (IRQs *5 7 9 10 11 14 15)
ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 *11 14 15)
ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 *10 11 14 15)
ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:02:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009bc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switched to clocksource refined-jiffies
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
ACPI: bus type PNP registered
system 00:00: [io 0x1000-0x107f] has been reserved
system 00:00: [io 0x1080-0x10ff] has been reserved
system 00:00: [io 0x1400-0x147f] has been reserved
system 00:00: [io 0x1480-0x14ff] has been reserved
system 00:00: [io 0x1800-0x187f] has been reserved
system 00:00: [io 0x1880-0x18ff] has been reserved
system 00:00: [io 0x2000-0x207f] has been reserved
system 00:00: [io 0x2080-0x20ff] has been reserved
system 00:00: [mem 0xfefe0000-0xfefe01ff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0800-0x087f] has been reserved
system 00:01: [io 0x0295-0x0314] has been reserved
system 00:01: [io 0x0290-0x0294] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:07: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:09: [mem 0xf0000000-0xf1ffffff] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:0a: [mem 0x000d0000-0x000d3fff] has been reserved
system 00:0a: [mem 0x000f0000-0x000f7fff] could not be reserved
system 00:0a: [mem 0x000f8000-0x000fbfff] could not be reserved
system 00:0a: [mem 0x000fc000-0x000fffff] could not be reserved
system 00:0a: [mem 0x3fff0000-0x3fffffff] could not be reserved
system 00:0a: [mem 0xffff0000-0xffffffff] has been reserved
system 00:0a: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:0a: [mem 0x00100000-0x3ffeffff] could not be reserved
system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 11 devices
ACPI: bus type PNP unregistered
PnPBIOS: Disabled by ACPI PNP
Switched to clocksource acpi_pm
pci 0000:02:00.0: BAR 6: assigned [mem 0xf4000000-0xf401ffff pref]
pci 0000:00:04.0: PCI bridge to [bus 02]
pci 0000:00:04.0: bridge window [io 0xa000-0xafff]
pci 0000:00:04.0: bridge window [mem 0xf2000000-0xf4ffffff]
pci 0000:00:04.0: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:10.0: PCI bridge to [bus 01]
pci 0000:00:10.0: bridge window [mem 0xf5000000-0xf50fffff]
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:00: resource 8 [mem 0x40000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0xa000-0xafff]
pci_bus 0000:02: resource 1 [mem 0xf2000000-0xf4ffffff]
pci_bus 0000:02: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf50fffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000dffff]
pci_bus 0000:01: resource 8 [mem 0x40000000-0xfebfffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
pci 0000:00:00.0: Found enabled HT MSI Mapping
ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0e.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:0f.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.0: Enabling HT MSI Mapping
pci 0000:00:09.0: Found disabled HT MSI Mapping
pci 0000:00:10.1: Enabling HT MSI Mapping
pci 0000:02:00.0: Boot video device
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 25324K (f4e7a000 - f6735000)
microcode: AMD CPU family 0xf not supported
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyring
audit: initializing netlink socket (disabled)
type=2000 audit(1408230000.967:1): initialized
bounce pool size: 64 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
fuse init (API version 7.22)
msgmni has been set to 1738
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
pcieport 0000:00:04.0: irq 40 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
vesafb: mode is 1280x1024x8, linelength=1280, pages=0
vesafb: scrolling: redraw
vesafb: Pseudocolor: size=0:6:6:6, shift=0:0:0:0
vesafb: framebuffer at 0xe0000000, mapped to 0xf8480000, using 1280k, total 1280k
Console: switching to colour frame buffer device 160x64
fb0: VESA VGA frame buffer device
ipmi message handler version 39.2
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
isapnp: Scanning for PnP cards...
00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:07: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:0b.1: EHCI Host Controller
ehci-pci 0000:00:0b.1: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:0b.1: debug port 1
ehci-pci 0000:00:0b.1: cache line size of 32 is not supported
ehci-pci 0000:00:0b.1: irq 22, io mem 0xf5106000
ehci-pci 0000:00:0b.1: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.13.0-34-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:0b.1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci 0000:00:0b.0: OHCI PCI host controller
ohci-pci 0000:00:0b.0: new USB bus registered, assigned bus number 2
ohci-pci 0000:00:0b.0: irq 23, io mem 0xf5105000
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: OHCI PCI host controller
usb usb2: Manufacturer: Linux 3.13.0-34-generic ohci_hcd
usb usb2: SerialNumber: 0000:00:0b.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 8 ports detected
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:03: alarms up to one year, y3k, 242 bytes nvram
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
platform eisa.0: Probing EISA bus 0
platform eisa.0: EISA: Cannot allocate resource for mainboard
platform eisa.0: Cannot allocate resource for EISA slot 1
platform eisa.0: Cannot allocate resource for EISA slot 2
platform eisa.0: Cannot allocate resource for EISA slot 3
platform eisa.0: Cannot allocate resource for EISA slot 4
platform eisa.0: Cannot allocate resource for EISA slot 5
platform eisa.0: Cannot allocate resource for EISA slot 6
platform eisa.0: Cannot allocate resource for EISA slot 7
platform eisa.0: Cannot allocate resource for EISA slot 8
platform eisa.0: EISA: Detected 0 cards
cpufreq-nforce2: No nForce2 chipset.
ledtrig-cpu: registered to indicate activity on CPUs
TCP: cubic registered
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
Using IPI No-Shortcut mode
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Magrathea: Glacier signing key: 1b7c0f16168c4b25c3a05a6a43091c8506e373df'
registered taskstats version 1
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
IMA: No TPM chip found, activating TPM-bypass!
regulator-dummy: disabling
Magic number: 10:616:49
rtc_cmos 00:03: setting system clock to 2014-08-16 23:00:01 UTC (1408230001)
powernow-k8: fid 0xc (2000 MHz), vid 0x8
powernow-k8: fid 0xa (1800 MHz), vid 0xa
powernow-k8: fid 0x2 (1000 MHz), vid 0x12
powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ (2 cpu cores) (version 2.20.00)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
isapnp: No Plug & Play device found
Freeing unused kernel memory: 872K (c19b4000 - c1a8e000)
Write protecting the kernel text: 6532k
Write protecting the kernel read-only data: 2764k
NX-protecting the kernel data: 5756k
systemd-udevd[97]: starting version 204
pata_amd 0000:00:0d.0: version 0.4.1
scsi0 : pata_amd
scsi1 : pata_amd
ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
ACPI: PCI Interrupt Link [APCH] enabled at IRQ 21
ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
firewire_ohci 0000:01:0e.0: added OHCI v1.10 device as card 0, 4 IR + 8 IT contexts, quirks 0x2
ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max UDMA/33
ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000000) ACPI=0x701f (60:600:0x13)
ata1.00: configured for UDMA/33
scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N JL10 PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:16:e6:1e:7d:d3
forcedeth 0000:00:14.0: highdma pwrctl gbit lnktim desc-v3
sata_nv 0000:00:0e.0: version 3.5
ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
sata_nv 0000:00:0e.0: Using SWNCQ mode
scsi2 : sata_nv
scsi3 : sata_nv
ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd400 irq 20
ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd408 irq 20
ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
sata_nv 0000:00:0f.0: Using SWNCQ mode
scsi4 : sata_nv
scsi5 : sata_nv
ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc000 irq 23
ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc008 irq 23
firewire_core 0000:01:0e.0: created device fw0: GUID 0016e60000c4daf6, S400
ata5: SATA link down (SStatus 0 SControl 300)
usb 2-1: new full-speed USB device number 2 using ohci-pci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3.00: HPA detected: current 390455722, native 390721968
ata3.00: ATA-7: ST3200827AS, 3.AAH, max UDMA/133
ata3.00: 390455722 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA ST3200827AS 3.AA PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg1 type 0
sd 2:0:0:0: [sda] 390455722 512-byte logical blocks: (199 GB/186 GiB)
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 < sda5 sda6 >
sda: p6 size 6008247 extends beyond EOD, enabling native capacity
ata3: hard resetting link
ata3: nv: skipping hardreset on occupied port
usb 2-1: New USB device found, idVendor=03f0, idProduct=0901
usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=12
usb 2-1: Product: hp scanjet scanner
usb 2-1: Manufacturer: Hewlett-Packard
usb 2-1: SerialNumber: CN266S207C
ata4: SATA link down (SStatus 0 SControl 300)
usb 2-2: new low-speed USB device number 3 using ohci-pci
ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
usb 2-2: New USB device found, idVendor=045e, idProduct=00db
usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-2: Product: Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000
usb 2-2: Manufacturer: Microsoft
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.0/input/input5
microsoft 0003:045E:00DB.0001: input,hidraw0: USB HID v1.11 Keyboard [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:0b.0-2/input0
input: Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000 as /devices/pci0000:00/0000:00:0b.0/usb2/2-2/2-2:1.1/input/input6
microsoft 0003:045E:00DB.0002: input,hidraw1: USB HID v1.11 Device [Microsoft Natural\xffffffc2\xffffffae\xffffffae Ergonomic Keyboard 4000] on usb-0000:00:0b.0-2/input1
ata3.00: n_sectors mismatch 390455722 != 390721968
ata3.00: new n_sectors matches native, probably late HPA unlock, n_sectors updated
ata3.00: configured for UDMA/133
ata3: EH complete
sd 2:0:0:0: [sda] 390721968 512-byte logical blocks: (200 GB/186 GiB)
sda: detected capacity change from 199913329664 to 200049647616
sda: sda1 sda2 < sda5 sda6 >
sd 2:0:0:0: [sda] Attached SCSI disk
usb 2-4: new low-speed USB device number 4 using ohci-pci
usb 2-4: New USB device found, idVendor=045e, idProduct=00d1
usb 2-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-4: Product: Microsoft Optical Mouse with Tilt Wheel
usb 2-4: Manufacturer: Microsoft
input: Microsoft Microsoft Optical Mouse with Tilt Wheel as /devices/pci0000:00/0000:00:0b.0/usb2/2-4/2-4:1.0/input/input7
hid-generic 0003:045E:00D1.0003: input,hidraw2: USB HID v1.11 Mouse [Microsoft Microsoft Optical Mouse with Tilt Wheel] on usb-0000:00:0b.0-4/input0
usb 2-5: new low-speed USB device number 5 using ohci-pci
usb 2-5: New USB device found, idVendor=045e, idProduct=0008
usb 2-5: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 2-5: Product: Microsoft SideWinder Precision Pro (USB)
usb 2-5: Manufacturer: Microsoft
input: Microsoft Microsoft SideWinder Precision Pro (USB) as /devices/pci0000:00/0000:00:0b.0/usb2/2-5/2-5:1.0/input/input8
hid-generic 0003:045E:0008.0004: input,hidraw3: USB HID v1.00 Joystick [Microsoft Microsoft SideWinder Precision Pro (USB)] on usb-0000:00:0b.0-5/input0
random: nonblocking pool is initialized
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
Adding 3004116k swap on /dev/sda6. Priority:-1 extents:1 across:3004116k FS
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
systemd-udevd[320]: starting version 204
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
parport_pc 00:08: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
parport0: Printer, HEWLETT-PACKARD DESKJET 840C
lp0: using parport0 (interrupt-driven).
i2c i2c-0: nForce2 SMBus adapter at 0x1c00
i2c i2c-1: nForce2 SMBus adapter at 0x1c80
k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
nv_tco: NV TCO WatchDog Timer Driver v0.01
nv_tco: Watchdog reboot not detected
nv_tco: initialized (0x1440). heartbeat=30 sec (nowayout=0)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
nvidia: module verification failed: signature and/or required key missing - tainting kernel
WARNING! power/level is deprecated; use power/control instead
ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=none
NVRM: loading NVIDIA UNIX x86 Kernel Module 304.117 Tue Nov 26 21:36:39 PST 2013
kvm: disabled by bios
device-mapper: multipath: version 1.6.0 loaded
ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
hda_intel: Disabling MSI
hda-intel 0000:00:10.1: Disabling 64bit DMA
hda-intel 0000:00:10.1: Enable delay in RIRB handling
type=1400 audit(1408230027.338:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=391 comm="apparmor_parser"
type=1400 audit(1408230027.338:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=391 comm="apparmor_parser"
type=1400 audit(1408230027.338:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=391 comm="apparmor_parser"
type=1400 audit(1408230027.338:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=391 comm="apparmor_parser"
type=1400 audit(1408230027.338:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=391 comm="apparmor_parser"
type=1400 audit(1408230027.338:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=391 comm="apparmor_parser"
SKU: Nid=0x0 sku_cfg=0x0000e601
SKU: port_connectivity=0x0
SKU: enable_pcbeep=0x1
SKU: check_sum=0x00000000
SKU: customization=0x00000000
SKU: external_amp=0x0
SKU: platform_type=0x0
SKU: swap=0x0
SKU: override=0x1
autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) type:line
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
mono: mono_out=0x0
dig-out=0x1e/0x0
inputs:
Rear Mic=0x18
Front Mic=0x19
Line=0x1a
CD=0x1c
dig-in=0x1f
realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0883
input: HDA NVidia Front Headphone as /devices/pci0000:00/0000:00:10.1/sound/card0/input16
input: HDA NVidia Line Out Side as /devices/pci0000:00/0000:00:10.1/sound/card0/input15
input: HDA NVidia Line Out CLFE as /devices/pci0000:00/0000:00:10.1/sound/card0/input14
input: HDA NVidia Line Out Surround as /devices/pci0000:00/0000:00:10.1/sound/card0/input13
input: HDA NVidia Line Out Front as /devices/pci0000:00/0000:00:10.1/sound/card0/input12
input: HDA NVidia Line as /devices/pci0000:00/0000:00:10.1/sound/card0/input11
input: HDA NVidia Front Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input10
input: HDA NVidia Rear Mic as /devices/pci0000:00/0000:00:10.1/sound/card0/input9
init: udev-fallback-graphics main process (573) terminated with status 1
EXT4-fs (sda5): re-mounted. Opts: (null)
init: failsafe main process (647) killed by TERM signal
Bluetooth: Core ver 2.17
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
type=1400 audit(1408230032.266:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=774 comm="apparmor_parser"
type=1400 audit(1408230032.266:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=774 comm="apparmor_parser"
type=1400 audit(1408230032.270:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=774 comm="apparmor_parser"
type=1400 audit(1408230032.518:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/share/gdm/guest-session/Xsession" pid=830 comm="apparmor_parser"
type=1400 audit(1408230032.522:12): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-freerdp/freerdp-session-wrapper" pid=832 comm="apparmor_parser"
type=1400 audit(1408230032.522:13): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=832 comm="apparmor_parser"
type=1400 audit(1408230032.522:14): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=832 comm="apparmor_parser"
type=1400 audit(1408230032.526:15): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=831 comm="apparmor_parser"
type=1400 audit(1408230032.526:16): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=831 comm="apparmor_parser"
type=1400 audit(1408230032.526:17): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="chromium" pid=831 comm="apparmor_parser"
type=1400 audit(1408230032.530:18): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/i386-linux-gnu/lightdm-remote-session-uccsconfigure/uccsconfigure-session-wrapper" pid=833 comm="apparmor_parser"
type=1400 audit(1408230032.530:19): apparmor="STATUS" operation="profile_load" profile="unconfined" name="chromium" pid=833 comm="apparmor_parser"
type=1400 audit(1408230032.530:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=834 comm="apparmor_parser"
init: cups main process (779) killed by HUP signal
init: cups main process ended, respawning
init: gdm main process (998) killed by TERM signal
init: samba-ad-dc main process (933) terminated with status 1
NVRM: Your system is not currently configured to drive a VGA console
NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
NVRM: requires the use of a text-mode VGA console. Use of other console
NVRM: drivers including, but not limited to, vesafb, may result in
NVRM: corruption and stability problems, and is not supported.
init: plymouth-upstart-bridge main process ended, respawning
audit_printk_skb: 162 callbacks suppressed
type=1400 audit(1408230064.018:75): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=2531 comm="apparmor_parser"
type=1400 audit(1408230064.018:76): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2531 comm="apparmor_parser"
type=1400 audit(1408230064.018:77): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/cupsd" pid=2531 comm="apparmor_parser"
systemd-hostnamed[3145]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!
systemd-hostnamed[3540]: Warning: nss-myhostname is not installed. Changing the local hostname might make it unresolveable. Please install nss-myhostname!